| | Diesel Engine | Model | Cummins QSLB8.9 (EU Stage IIIA) |
| | Displacement | 8.9L |
| | Power | 242kW (325HP) |
| | Rated RPM | 2100rpm |
| | Drilling Capacity | BQ | 2850 m |
| | NQ | 2250 m |
| | HQ | 1850 m |
| | PQ | 1350 m |
| | Drill Head | Rotation Motor | Two-speed Hydraulic Motor Producer: Rexroth of Germany |
| | RPM | Three shifts Stepless Change: 0-1250 RPM |
| | Ratios | 1st 8.2:1 2nt 4.2:1 3nd 1:1 |
| | Head Opener | sidewise sliding way with hydraulic drive |
| | Hydraulic Chuck(PQ) | 294000N Hydraulically opened, Disc Spring Clamping, Normally C Closed Type Axial Holding Capacity of 294000 N |
| | Max. Torque | 7550 N·m |
| | Hold Diameter | 121 mm |
| | Max. Lifting capacity of Spindle | 320 kN |
| | Max. Feeding Power | 140 kN |
| | Primary Pump | Hydraulic pump: Axial Piston variable displacement Triplex pump for driving of rotator, winch mud pump & leveling jacks. With load sensing system. | Producer: Danfoss of Denmark 1st Pump: 380LPM at 35 MPa 2nd Pump: 260LPM at 31.5MPa 3rd Pump: 130 LPM at 31.5MPa |
| | Hydraulic Tank | Capacity | 500 L (111 US Gallons) |
| | Capacity of Main Hoist | Hoisting Speed (single wire) | 0-80 m/min(bare drum) |
| | Hoisting force (single wire) | 160 kN |
| | Steel Wire Diameter | 26-28 mm |
| | Steel Wire Length | 55 m |
| | Capacity of Wireline Hoist | Hoisting Force (single wire) | 15 kN(3372 lbf) (bare drum) |
| | Steel Wire Diameter | 6 mm(0.24 inch) |
| | Steel Wire Length | 3200 m |
| | Mast | Mast Height | 9.5 m |
| | Mast Adjusting Angle | 0°—90° |
| | Drilling Angle | 45º off horizontal to 90ºvertical down |
| | Feeding Stroke | 3700 mm |
| | Slippage Stroke | 1000 mm |
| | Feed Pull | 32 ton |
| | Feed Thrust | 14 ton |
| | Rod Pull | 3m or 6m(9.84feet or 19.68feet) |
| | Mud Pump | Type | Reciprocating Pump Triplex Plunger |
| | Model | BW500 |
| | Stroke | 110mm(4.3 inch) |
| | Output volume | 500 L/min |
| | Discharge pressure | 8.0 Mpa |
| | Foot Clamp | Clamping Scope | 55.5-118 mm through hole Ф165mm |
| | Others | Weight | 13.50 ton |
| | Transport Dimensions | 6250×2240×2480mm |
| | Transport Way | Steel Crawler |
| Details of the major imported components |
| 1 | Rotation Motor | Germany Rexroth GmbH | 1 | A6VM160 |
| 2 | Hydraulic pump | Danfoss Co. Ltd | 3 | |
| 3 | Main control valve | Danfoss Co. Ltd | 2 | PVG100,PVG32-2 |
| 4 | Main winch motor reducer | Germany Rexroth GmbH | 1 | |
| 5 | Secondary winch motor | American Eaton Corporation | 1 | |
| 6 | Crawler Track drive motor | Korea Jijin Hydraulic Co., Ltd | 2 | |
| 7 | Elastic coupling | German company KTR | 1 | |
| 8 | Diesel engine | Dongfeng Cummins Power C | 1 | |
| 9 | Mud Pump | Jiangsu Elephants Machinery Co., Ltd | 1 | BW320 |
| 10 | Hydraulic Clamp | Self produce | 1 | |
| 11 | Wellhead holder | Self produce | 1 | |
| 12 | Operating platform | Self produce | 1 | |
| 13 | Crawler chassis | Self produce | 1 | |
| 14 | Mast (telescopic) | Self produce | 1 | |
| 15 | Drill Head | Self produce | 1 | |
| 16 | Upper and lower centralizer | Self produce | 2 | BQ,NQ,HQ |
| 17 | Jaw of Drill Head | | 2 | BQ,NQ,HQ |
| 18 | Jaw of Wellhead holder | | 2 | BQ,NQ,HQ |
| 19 | Protection device | Self produce | | |
| 20 | Auxiliary support | | 1 | |
| 21 | Accessories of machine | Self produce | 1 | Sealing ring, slipper mud pump parts, tools, etc |
